This is probably one of the most simplest explosives to make. All you need is a coat hanger (the kind with the white cardboard tubing as the bottom wire), gunpowder, a fuse, and some tape. First take the tubing off of the hanger. Then cut it into a piece about three and a half inches in
length. Fold about a half of an inch inward of one end. Then tape it down with any kind of tape. even scotch tape works fine. Then make a hole with a SMALL nail about a half an inch from the crimped end. You can then pour in your gunpowder. Pour it in until it gets to be half an inch to the open end. Then crimp this end just as you did with the other (Don't forget the tape!). Then you can insert the fuse into the hole you made, light it, and run!
A revision to the above would be after you make the regular coat hanger explosive, take some modeling clay and coat the bomb with it, making sure not to cover up the hole for the fuse. This will prove usefull by allowing you to stick it on smooth objects such as buildings.
This is eqevalent to a pack of firecrakers going off at once. In other words it's pretty loud for it's size!
